DIY Fin Adapter for Inflatables (K-1 & J-2 Motors)

Current Stock:
Adding to cart… The item has been added

If you own an inflatable kayak or an inflatable stand up paddle board (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you'll be able to easily slide your Bixpy Motor onto your newly installed fin box. 

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you're glueing to a PVC surface, you can use a PVC to PVC adhesive. If you're gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat's construction, please contact your boat maker for the best advice or reach out to us and we'll do our best to help at:

Make sure that you are getting the right Bixpy adapter for your watercraft on

* Motors shown in the pictures above are not included in the adapter kit


  • Easily attached to inflatable and PVC materials using adhesive glue
  • Motor draft: 6" (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use 
  • Water use: All PVC materials made for salt water or fresh water use


  • Inflatable Fin Box - Adapter
  • Bixpy Slide & Lock Fin Adapter 
  • All hardware required

Installation Guides

Video Gallery

1 year warranty from date of purchase from or an authorized dealer
Marketplace Title:
Bixpy DIY Fin Adapter for Inflatables - Quick Connect, Glued On, Mounting Adapter for Bixpy K-1 or J-2 Electric Marine Trolling Motor, Motorize Inflatable Watercraft, Paddle Boards
Bixpy DIY Fin Adapter for Inflatables (K-1 & J-2 Motors)
Installation Difficulty:
Easy to Intermediate
Steering Options:
Use your paddle or existing hand/foot steering system
Installation Videos/Instructions:
Additional helpful hardware:
Clean rag, rubbing alcohol cleaning spray, and gloves
Good to know:
This fin box does NOT ship with adhesive as you will need to purchase your own PVC or urethane adhesive glue