The DIY (Do It Yourself) Fin & Rudder Adapter is the base for every other Bixpy WillFit™ Adapter, so it makes the perfect DIY Adapter. You can use this adapter to custom build your own BixpyReady™ fin or rudder.
This is also the adapter you will need for BixpyReady™ components from other manufacturers - Example: Vibe Bixpy-Ready Gravity Rudder will require this adapter to fit the Bixpy J-1 PowerShroud™ Motor.
If you have a rudder, centerboard or skeg plate or anything with 1/4" (6mm) thickness and you would like to motorize it, you can download a DIY blade template and make your own motorized rudder or skeg with the DIY (Do It Yourself) Fin & Rudder Adapter.
Check out this instructional video on exactly how to do that in minutes. In this video, we install a Bixpy Jet to a rudder from a Viking Kayak. You can attach the Bixpy DIY Rudder Adapter to virtually any kayak rudder using the same method. You can also use the same method to attach the jets to virtually any fin on any small watercraft.
- DIY (Do It Yourself) Fin & Rudder Adapter
- All hardware required to attach to kayaks and canoes
- Wire to run to your Bixpy Outboard Battery - 6' (185 cm) from tip to tip
- Instruction card
Protection: Water-proof, dirt-proof and corrosion resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
Click here for installation guides and videos.
Videos Hide Videos Show Videos
Bixpy Motor installed on the rudder of a Viking ProFish Kayak
After installing the Bixpy J-1 PowerShroud™ Motor on the Vikin...
Bixpy Installations - Bixpy DIY Fin & Rudder Adapter
In this video, we install a Bixpy J-1 PowerShroud™ Motor to a ...
Mounting a Bixpy Up Haul Kit on a Viking ProFish Reload
I recently purchased a Viking ProFish Reload Kayak along with ...